Special Tool(s)

WARNING: This page is about a different car, the 2010 Mercury Mariner and 2010 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.

SPECIAL TOOL REFERENCE

Courtesy of FORD MOTOR CO.	Compressor, Forward Clutch Spring 307-574 (includes 307-574/1 and 307-574/2)
Courtesy of FORD MOTOR CO.	Compressor, Forward/Intemediate Spring 307-584 (includes 307-584/1 and 307-584/2)
Courtesy of FORD MOTOR CO.	Dial Indicator Gauge With Holding Fixture 100-002 (TOOL-4201-C)
Courtesy of FORD MOTOR CO.	Handle 205-153 (T80T-4000-W)
Courtesy of FORD MOTOR CO.	Handle, Torque Converter 307-091 (T81P-7902-C)
Courtesy of FORD MOTOR CO.	Holding Fixture 307-625
Courtesy of FORD MOTOR CO.	Input Shaft Support Seal Installer (Back Plate, Multiple Rings) 307-578 (includes 307-578/1, 307-578/2 and 307-578/3)
Courtesy of FORD MOTOR CO.	Installer, Differential Seal 307-626
Courtesy of FORD MOTOR CO.	Installer, RH Halfshaft Fluid Seal 307-428
Courtesy of FORD MOTOR CO.	Manual Lever Seal Installer 307-581
Courtesy of FORD MOTOR CO.	Retainer, Torque Converter 307-566
Courtesy of FORD MOTOR CO.	Seal Protector, 2-6 Piston 307-632
Courtesy of FORD MOTOR CO.	Seal Protector, Turbine Shaft 307-635
Courtesy of FORD MOTOR CO.	Shim Selection Gauge 307-300 (T94P-77000-Q) (17-055)
Courtesy of FORD MOTOR CO.	Spring Compressor, 2-6 Piston Return 307-633 (Includes 307-633/1 and 307-633/2)