Radiator Grille - Fusion
WARNING: This page is about a different car, the 2010 Mercury Milan, 2010 Lincoln MKZ, and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
ITEM DESCRIPTION TABLE
| Item | Part Number | Description |
|---|---|---|
| 1 | W707501 | Upper radiator grille nuts (2 required) |
| 2 | W707501 | Center radiator grille nuts (2 required) |
| 3 | W707501 | Badge nut (2 required) |
| 4 | 8A164 | Radiator grille reinforcement |
| 5 | 8150-B | Upper radiator grille |
| 6 | 8B262 | Badge |
| 7 | 8150-C | Center radiator grille |
| 8 | 17C831 | Front bumper cover |
| 9 | 17K946-J LH/17K947-J RH | Fog lamp bezel molding |
| 10 | 17K946-F LH/17K947-F RH | Fog lamp bezel |
| 11 | - | Lower radiator grille molding clip (9 required) (part of 17K945) |
| 12 | 8150-D | Lower radiator grille |
| 13 | 17K945 | Lower radiator grille molding |
All radiator grilles
- Remove the front bumper cover. For additional information, refer to BUMPER COVER -- FRONT
.
Upper and center radiator grilles
- Press the tabs to release the radiator grille reinforcement and remove the radiator grille reinforcements.
Upper radiator grille
- Remove the upper radiator grille nuts.
- Remove the upper radiator grille.
Center radiator grille
- Remove the center radiator grille nuts.
- Remove the center radiator grille.
Lower radiator grille
- Remove the lower radiator grille molding clips.
- Remove the lower radiator grille molding.
- Press the tabs to release the lower radiator grille from the front bumper cover.
- Remove the lower radiator grille from the bumper cover.
All vehicles
- To install, reverse the removal procedure.