LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1767 (Interior Trim And Ornamentation) >> Removal And Installation >> Parcel Shelf >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2010 Mercury Milan, 2010 Lincoln MKZ, and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the C-pillar trim panels. For additional information, refer to Removal and Installation .
  2. Remove the rear seat bolsters. For additional information, refer to REMOVAL .
  3. Fold the rear seats down.
  4. Pull the seat back latch covers forward and remove from the vehicle.
  5. Remove the high mounted stoplamp. For additional information, refer to REMOVAL AND INSTALLATION .
  6. Remove the 4 pushpins.
  7. Thread the seat belts through the guides.
  8. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals