LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1763 (Interior Lighting System) >> Removal And Installation >> Ambient Lighting Switch >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2010 Mercury Milan, 2010 Lincoln MKZ, and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the instrument panel side finish panel.
  2. Remove the switch bezel.
    • Disconnect the electrical connectors.
    NOTE: The switch bezel is removed by pushing from behind.
  3. Release the tabs and remove the ambient lighting switch.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals