LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1759 (Anti-Theft System - Passive Anti-Theft System (Pats) (Hybrid)) >> Diagnosis And Testing >> Anti-Theft >> Pinpoint Tests >> Pinpoint Test H: The Vehicle Does Not Start >> Normal Operation

Normal Operation

WARNING: This page is about a different car, the 2010 Mercury Milan and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.

During each vehicle start sequence, when the key is turned to the START or ON position, the Passive Anti-Theft System (PATS) transceiver reads the PATS  key ID code and sends the data to the Instrument Panel Cluster (IPC). If the concern is due to a PATS  concern, PATS  DTCs can set in the IPC  , and DTC P1260:61 in the Transmission Control Module (TCM). If it is due to a starting system, or a driveability concern, there is no PATS  DTCs in the IPC  or DTC P1260 in the PCM or DTC P1260:61 in the TCM  .

This pinpoint test is intended to diagnose the following: