Normal Operation
WARNING: This page is about a different car, the 2010 Mercury Milan, 2010 Lincoln MKZ, and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
Under normal operation, the LH and RH front power window control switches receive power from the accessory delay relay through circuit CBP41 (BU). The RH window motor receives battery power through circuit SBP04 (GN/RD) at all times and ground through circuit GD139 (BK/YE). When the LH or RH front window control switch is pulled, a voltage signal is sent to the RH front window motor through circuit CPW13 (BN/YE) which causes the window to move upward. When the LH or RH front window control switch is pressed, a voltage signal is sent to the RH front window motor through circuit CPW12 (GN/OG) which causes the window to move downward.
This pinpoint test is intended to diagnose the following:
- Fuse(s)
- Wiring, terminals or connectors
- RH front window motor
- LH or RH front window control switch
- RH front window motor not initialized