LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1742 (Automatic Transaxle Cooling (ECVT) (Hybrid)) >> Diagnosis And Testing >> Transaxle Cooling >> Symptom Table - Transaxle Cooling

Symptom Table - Transaxle Cooling

WARNING: This page is about a different car, the 2010 Mercury Milan and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
SYMPTOM TABLE - TRANSAXLE COOLING

Condition Possible Sources Action
  • Motor Electronics Cooling System (MECS) overheating
  • Clogged MECS  radiator or hoses
  • INSPECT the MECS  radiator and hoses for damage or plugging.
-
  • Kinked MECS  hoses
  • MECS  leaks
  • INSTALL a new MECS  radiator or hoses as necessary.
  • INSPECT the MECS  radiator and hoses for leaks. REPAIR or INSTALL new components as necessary.
-
  • MECS  pump does not operate
  • Air in cooling system
  • CHECK the MECS  pump electrical system. Go to PINPOINT TEST A .
  • Loosen the MECS  bleed screw located on the DC/DC converter to bleed any air from the cooling system.
-
  • Radiator cooling fans
  • Internal transaxle concerns