Seat Latch Adjustment - Rear

WARNING: This page is about a different car, the 2010 Mercury Milan, 2010 Lincoln MKZ, and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.

Remove the parcel shelf. For additional information, refer to INTERIOR TRIM AND ORNAMENTATION .
Loosen the 2 rear seat backrest latch nuts. Adjust the latch position as necessary for good backrest fit and latch closure when upright.
- Tighten to 48 Nm (35 lb-ft).
Fig 1: Removing Parcel Shelf
Courtesy of FORD MOTOR CO.
Install the parcel shelf. For additional information, refer to INTERIOR TRIM AND ORNAMENTATION .