System Check Displays (RESET button)
WARNING: This page is about a different car, the 2010 Mercury Milan, 2010 Lincoln MKZ, and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
By pressing the RESET button on the message center switch, the message center cycles through each of the system check displays being monitored. For each of the monitored systems, the message center indicates either an OK message or a warning message for 2-4 seconds.
The system check provides a check of the following systems:
- XXX% oil life
- All doors closed
- Trunk closed
- BLIS™ (if equipped)
- CTA system (if equipped)
- Brake system
- Fuel level