Climate Control System: Notes
WARNING: This page is about a different car, the 2010 Mercury Milan and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
The system consists of the following components:
- Air Conditioning Compressor Module (ACCM)
- A/C condenser core
- A/C evaporator core
- Receiver/drier
- Connecting refrigerant lines
- Thermostatic Expansion Valve (TXV)
- A/C pressure transducer
- Heater core and evaporator core housing
- HVAC module
- Front Controls Interface Module (FCIM) (all vehicles equipped with navigation systems)
- Audio Control Module (ACM) (all vehicles equipped with navigation systems)
- Temperature blend door actuators
- Defrost/panel/floor mode door actuator
- Air inlet mode door actuator
- Blower motor speed control
- Blower motor
- Ambient air temperature sensor
- In-vehicle temperature/humidity sensor
- Sunload sensor
- Evaporator temperature sensor