Rear Ride Height Measurement
WARNING: This page is about a different car, the 2010 Mercury Milan, 2010 Lincoln MKZ, and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
ITEM DESCRIPTION TABLE
| Item | Description |
|---|---|
| 1 | Ride height = 2 - 3 |
| 2 | Measurement 2 |
| 3 | Measurement 3 |
NOTE:
Make sure that the vehicle is positioned on a flat, level surface and the tires are inflated to the correct pressure. Vehicle should have a full tank of fuel.
- Measure the distance between the flat level surface and center of the lower arm inboard cam bolt (measurement 2).
- Measure the distance between the flat level surface and the center of the lower arm outboard bolt (measurement 3).
- Subtract measurement 3 from measurement 2 to obtain the rear ride height.