LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1663 (Automatic Transaxle - AISIN Aw21) >> Diagnosis And Testing >> Preliminary Inspection >> Check Transmission Fluid Level and Condition >> Adding Transmission Fluid

Adding Transmission Fluid

WARNING: This page is about a different car, the 2010 Mercury Milan, 2010 Lincoln MKZ, and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: The use of any other type of transmission fluid than specified could result in transaxle malfunction and/or damage.

If transmission fluid needs to be added, add transmission fluid in 0.25L (1/2 pt) increments through the transmission fluid filler tube. Do not overfill the transmission fluid. For transmission fluid type, refer to MATERIAL SPECIFICATIONS TABLE .