Shift Control Solenoids (SSC, SSD, SSE, SSF)
WARNING: This page is about a different car, the 2010 Mercury Milan, 2010 Lincoln MKZ, and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
ITEM DESCRIPTION TABLE
| Item | Description |
|---|---|
| 1 | Shift Solenoid C (SSC) |
| 2 | Shift Solenoid D (SSD) |
| 3 | Shift Solenoid E (SSE) |
| 4 | Shift Solenoid F (SSF) |
The shift control solenoid assembly (Shift Solenoid C (SSC), Shift Solenoid D (SSD), Shift Solenoid E (SSE), Shift Solenoid F (SSF)) is installed on the front valve body. The solenoids linearly control hydraulic pressure in response to signals, output from the TCM . Through this, it controls hydraulic pressure to the clutch (C1, C2, C3) and brakes (B1) for smooth shifting. According to the combination of ON or OFF status of the shift control solenoid assembly, the transaxle shifts from 1st gear into 6th gear and vice versa. As a fail-safe function, if any shift control solenoid assembly abnormality occurs, the TCM will disable the current to the shift control solenoids.