DTC P0113: Intake Air Temperature (IAT) Sensor 1 Circuit High
WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2010 Mercury Mountaineer, 2010 Mercury Milan, 2010 Mercury Mariner, 2010 Mercury Grand Marquis, and 2010 Lincoln Town Car. However, it is still accessible from the selected car via links, so may be relevant.
DTC P0113: INTAKE AIR TEMPERATURE (IAT) SENSOR 1 CIRCUIT HIGH
| Description: | Indicates the sensor signal is greater than the self-test maximum. The IAT sensor maximum is 4.6 volts or -50°C (-58°F). | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | An IAT PID reading greater than 4.6 volts with the ignition ON engine OFF or during any engine operating mode indicates a concern is present. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST DA . | ||