LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1650 (Engine Controls - Powertrain DTC Charts & Descriptions - (Hybrid)) >> DTC Diagnosis >> P0605 - Internal Control Module Read Only Memory (ROM) Error

P0605 - Internal Control Module Read Only Memory (ROM) Error

WARNING: This page is about a different car, the 2010 Mercury Mariner and 2010 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
P0605 - INTERNAL CONTROL MODULE READ ONLY MEMORY (ROM) ERROR

Description:  The powertrain control module (PCM) ROM has been corrupted.
Possible Causes: 
  • An attempt was made to change the calibration
  • Module programming error
  • Damaged PCM
Diagnostic Aids:  Reprogram or update the calibration. Reprogram the VID block (use as built data). Check for other DTCs or drive symptoms for additional information. Be sure to check for aftermarket performance products before replacing the PCM. If replacement is necessary, refer to FLASH ELECTRICALLY ERASABLE PROGRAMMABLE READ ONLY MEMORY (EEPROM) .
Application  Key On Engine Off  Key On Engine Running  Continuous Memory 
All Refer to the P0607 - CONTROL MODULE PERFORMANCE  Description, Possible Causes and Diagnostic Aids for the DTC.