P0113 - Intake Air Temperature (IAT) Sensor 1 Circuit High Input
WARNING: This page is about a different car, the 2010 Mercury Mariner and 2010 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
P0113 - INTAKE AIR TEMPERATURE (IAT) SENSOR 1 CIRCUIT HIGH INPUT
| Description: | Indicates the sensor signal is greater than the self-test maximum. The IAT sensor maximum is 4.93 volts. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | An IAT V PID reading greater than 4.93 volts with KOEO or during any engine operating mode indicates a concern. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST DA . | ||