Description And Operation: Anti-Theft: Notes
The passive anti-theft system (PATS) consists of the following components:
- Anti-theft indicator (located in the instrument cluster [IC])
- Encoded ignition integrated keyhead transmitter (IKT) PATS key(s) (the key contains a transponder and a remote keyless entry [RKE] transmitter)
- PATS transceiver
- IC
- PCM
PATS uses radio frequency identification technology to deter a drive-away theft. Passive means that it does not require any activity by the user.
The vehicle is equipped with 2 IKT PATS keys. The IKTs operate as a standard PATS key with an RKE transmitter incorporated into the keyhead. The IKTs require batteries for the RKE transmitter to operate. A maximum of 4 IKT keys can be programmed to operate the vehicle. If more than 4 IKT keys are programmed, the RKE portion of the additional keys do not operate and the SJB (and the IC) sets a memory full DTC B1138 (Memory Full). These additional keys will start the vehicle, but will not operate the RKE system. If additional PATS keys are desired, a standard PATS key (a non-IKT key) can be used. For the purposes of this information, the PATS portion of the IKT key is referred to as a PATS key.