LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1629 (Instrument Panel & Console) >> Removal And Installation >> Instrument Panel Finish Panel - Center, Taurus, Sable >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2009 Mercury Sable, 2009 Ford Taurus X, and 2009 Ford Taurus. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the selector lever trim ring.
  2. Remove the floor console finish panel.
  3. Remove the 2 center instrument panel finish panel screws.
    4. Fig 1: Instrument Panel Center Finish Panel Screws
    GF0016586Courtesy of FORD MOTOR CO.
  4. Remove the center instrument panel finish panel.
    • Disconnect the electrical connectors.
  5. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals