Functional Test - Retractor
WARNING: This page is about a different car, the 2009 Mercury Sable, 2009 Ford Taurus X, and 2009 Ford Taurus. However, it is still accessible from the selected car via links, so may be relevant.
The safety belt retractor assembly must be freely operational for extraction and retraction of the safety belt webbing between full extension and in-vehicle stowed positions.
- Extract and retract the safety belt between the full extension and stowed positions.
- Verify the retractor operates without excessive effort or binding.
- Install a new safety belt retractor and buckle if no obvious concerns are noticed and the concern has been verified.