LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1620 (Handles, Locks, Latches & Entry Systems) >> General Procedures >> Remote Memory Activation

Remote Memory Activation

WARNING: This page is about a different car, the 2009 Mercury Sable, 2009 Ford Taurus X, and 2009 Ford Taurus. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the seat and mirrors to the desired positions.
  2. Press the set button on the driver door trim panel.
  3. Within 5 seconds, press 1 of the 2 buttons on the driver door panel to associate with the driver 1 or driver 2 position.
  4. Press the set button again.
  5. Within 5 seconds, press a button on the associated integrated keyhead transmitter (IKT).
  6. Within 5 seconds, press 1 of the 2 buttons on the driver door panel to associate with the driver 1 or driver 2 position.
  7. If a second memory setting is desired, repeat the procedure with the second IKT.
scientia non olet · About LEMON Manuals