LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1620 (Handles, Locks, Latches & Entry Systems) >> General Procedures >> Keyless Entry Keypad Code Programming >> Erasing a Personal Entry Code

Erasing a Personal Entry Code

WARNING: This page is about a different car, the 2009 Mercury Sable, 2009 Ford Taurus X, and 2009 Ford Taurus. However, it is still accessible from the selected car via links, so may be relevant.
  1. Enter the factory set 5-digit keyless entry keypad code.
  2. Within 5 seconds, press the 1/2 button on the keypad and release.
  3. Within 5 seconds, press and hold the 1/2 button for 2 seconds.
  4. All personal codes are now erased and only the factory set 5-digit code will work.
scientia non olet · About LEMON Manuals