Remote Keyless Entry (RKE)
The Remote Keyless Entry (RKE) system uses an Integrated Keyhead Transmitter (IKT). The RKE incorporates both the Passive Anti-Theft System (PATS) functions and the RKE transmitter functions in a single device.
The RKE transmitter is programmed automatically during PATS programming. During PATS programming, the Instrument Cluster (IC) obtains the Transmitter Identification Code (TIC) from the IKT and sends the TIC data over the Medium Speed Controller Area Network (MS-CAN) to the SJB.
The SJB accepts programming of up to 4 IKTs. In addition to the IKTs, 4 standard keyfobs can also be programmed to the vehicle if requested by the customer. Refer to Key Programming Using Two Programmed Keys or Integrated Keyhead Transmitter (IKT) Key Programming Using Diagnostic Equipment in ANTI-THEFT - PASSIVE ANTI-THEFT SYSTEM (PATS) article for programming information. Refer to Remote Keyless Entry Transmitter Programming for programming information.
The IKT initiates the following electronic system functions:
- Unlock the LH front door
- Unlock all doors
- Lock all doors
- Activate/deactivate the panic alarm
- Command the interior lamps on (when unlocking) and off (when locking)
- Sound the horn once when LOCK is pressed twice within 3 seconds, and the doors are closed
- Sound the horn twice when LOCK is pressed twice within 3 seconds, and any door is ajar
The IKT has a normal operating range of 10 m (33 ft).