LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1616 (HVAC Climate Control System) >> Removal And Installation >> Thermostatic Expansion Valve Manifold and Tube Assembly >> Notes

Thermostatic Expansion Valve Manifold and Tube Assembly: Notes

WARNING: This page is about a different car, the 2009 Mercury Sable, 2009 Ford Taurus X, and 2009 Ford Taurus. However, it is still accessible from the selected car via links, so may be relevant.
Material

Item Specification
PAG Refrigerant Compressor Oil (R-134a Systems)
YN-12-D
WSH-M1C231-B
Fig 1: Thermostatic Expansion Valve Manifold and Tube Assembly With Torque Specifications
GF0046069Courtesy of FORD MOTOR CO.
Item Part Number Description
1 W520413 Evaporator outlet line fitting nut
2 W708877 Evaporator inlet line fitting bracket bolt
3 W520413 Evaporator inlet line fitting nut
4 - Thermostatic expansion valve (TXV) manifold and tube bracket bolt (part of 19835)
5 9J279 Evaporative emission (EVAP) canister purge valve lower fitting
6 W520413 Auxiliary evaporator inlet line fitting nut
7 W520413 Auxiliary evaporator outlet line fitting nut
8 N808664 TXV fitting bolt
9 19835 TXV manifold and tube assembly
10 19B596 O-ring seal and gasket seal kit (2 required if equipped with auxiliary climate control)
11 19B596 O-ring seal and gasket seal kit (2 required if equipped with auxiliary climate control)