LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1607 (Automatic Transmission) >> In-Vehicle Servicing >> Halfshaft Seal - LH >> Installation

Halfshaft Seal - LH: Installation

WARNING: This page is about a different car, the 2009 Mercury Sable, 2009 Ford Taurus X, and 2009 Ford Taurus. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install a new halfshaft seal on the Cover Axle Seal Installer and Handle.
    2. Fig 1: Installing Halfshaft Seal On Special Tools (307-582) & (205-153)
    GF0031676Courtesy of FORD MOTOR CO.
  2. Using the Cover Axle Seal Installer and Handle, install the LH halfshaft seal.
    3. Fig 2: Installing LH Halfshaft Seal Using Special Tools (307-582) & (205-153)
    GF0031680Courtesy of FORD MOTOR CO.
  3. Install the front LH halfshaft. For additional information, refer to FRONT DRIVE HALFSHAFTS article.
  4. Fill with clean transmission fluid to the correct level.
scientia non olet · About LEMON Manuals