On-Board Diagnostic (OBD) With Scan Tool
WARNING: This page is about a different car, the 2009 Mercury Sable, 2009 Ford Taurus X, and 2009 Ford Taurus. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
For detailed instruction and other diagnostic methods using the scan tool or equivalent, refer to the scan tool tester manual and the Introduction - Gasoline Engines
article.
These Self-Tests should be used to diagnose the PCM and should be carried out in order.
- Self Test - Key ON Engine OFF (KOEO)
- Self Test - Continuous Memory Codes
- Self Test - Key ON Engine Running (KOER)
- Special Test Modes:
- Wiggle Test Mode
- Output Test Mode
- PCM Reset Mode
- Clearing DTCs P1000
- On-Board Diagnostic (OBD) II Drive Cycle
- Other Diagnostic Tool Features
For further information on other diagnostic testing features using the scan tool, refer to the Introduction - Gasoline Engines article. Other diagnostic methods include the following.
- PID Access Mode
- Freeze Frame Data Access Mode
- Oxygen Sensor Monitor Mode