Section 1606 (Engine Mechanical): Removal: Camshaft: Notes
WARNING: This page is about a different car, the 2009 Mercury Sable, 2009 Ford Taurus X, and 2009 Ford Taurus. However, it is still accessible from the selected car via links, so may be relevant.
SPECIAL TOOLS
| Illustration | Tool Name | Tool Number |
|---|---|---|
| 3-Jaw Puller | 303-D121 | |
| Camshaft Alignment Tool | 303-1248 | |
| Disconnect Tool, Transmission Cooler Tube | 307-569 | |
| Handle | 205-153 (T80T-4000-W) | |
| Powertrain Lift | 014-00765 | |
| Remover, Front Hub | 205-D070 (D93P-1175-B) or equivalent | |
| Remover, Halfshaft (Extension) | 205-243 (T89P-3415-A) | |
| Remover, Halfshaft (Plate) | 205-290 (T89P-3415-B) | |
| Remover, Oil Seal | 303-409 (T92C-6700CH) | |
| Seal Remover | 303-1247/1 | |
| Slide Hammer | 100-001 (T50T-100-A) | |
| Strap Wrench | 303-D055 (D85L-6000-A) | |
| Universal Adapter Brackets | 014-0001 |
MATERIAL
| Item | Specification |
|---|---|
| Motorcraft Metal Surface Prep ZC-31-A |
- |
| Silicone Gasket Remover ZC-30 |
- |