Section 1606 (Engine Mechanical): Installation: Camshaft: Notes
WARNING: This page is about a different car, the 2009 Mercury Sable, 2009 Ford Taurus X, and 2009 Ford Taurus. However, it is still accessible from the selected car via links, so may be relevant.
SPECIAL TOOLS
| Illustration | Tool Name | Tool Number |
|---|---|---|
| Alignment Pins | 307-399 | |
| Camshaft Alignment Tool | 303-1248 | |
| Handle | 205-153 (T80T-4000-W) | |
| Installer, Crankshaft Front Seal | 303-1251 | |
| Installer, Crankshaft Vibration Damper | 303-102 (T74P-6316-B) | |
| Installer, Front Cover Oil Seal | 303-335 | |
| Installer, Seal | 303-1247/2 | |
| Powertrain Lift | 014-00765 | |
| Strap Wrench | 303-D055 (D85L-6000-A) |
MATERIAL
| Item | Specification |
|---|---|
| Motorcraft High Performance Engine RTV Silicone TA-357 |
WSE-M4G323-A6 |
| Motorcraft Metal Surface Prep ZC-31-A |
- |
| Motorcraft SAE 5W-20 Premium Synthetic Blend Motor Oil XO-5W20-QSP (US); Motorcraft SAE 5W-20 Super Premium Motor Oil CXO-5W20-LSP12 (Canada); or equivalent |
WSS-M2C930-A |
| Silicone Gasket Remover ZC-30 |
- |