LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1597 (Rear Disc Brake System) >> Removal And Installation >> Rear Disc Brake Shield >> Removal

Rear Disc Brake Shield: Removal

WARNING: This page is about a different car, the 2009 Mercury Sable, 2009 Ford Taurus X, and 2009 Ford Taurus. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the brake disc. For additional information, refer to Brake Disc .
  2. Remove the 3 bolts and the brake disc shield.
    • To install, tighten to 14 Nm (10 lb-ft).
  3. To install, reverse the removal procedure.