LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1596 (Front Disc Brake System) >> Removal And Installation >> Front Brake Caliper Anchor Plate >> Installation

Front Brake Caliper Anchor Plate: Installation

WARNING: This page is about a different car, the 2009 Mercury Sable, 2009 Ford Taurus X, and 2009 Ford Taurus. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the brake caliper anchor plate and steering stop on the wheel knuckle and install 2 new bolts.
    • Tighten to 150 Nm (111 lb-ft).
  2. Install the brake pads. For additional information, refer to Brake Pads .
scientia non olet · About LEMON Manuals