LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1594 (Information Center - Instrument Cluster (Ic), Message Center, & Warning Chimes) >> Removal And Installation >> Instrument Cluster (IC) >> Removal

Instrument Cluster (IC): Removal

WARNING: This page is about a different car, the 2009 Mercury Sable, 2009 Ford Taurus X, and 2009 Ford Taurus. However, it is still accessible from the selected car via links, so may be relevant.
  1. If installing a new instrument cluster (IC), upload the module configuration information to the scan tool. For additional information, refer to MODULE CONFIGURATION article.
  2. Remove the instrument cluster (IC) finish panel. For additional information, refer to INSTRUMENT PANEL AND CONSOLE article.
  3. Remove the 4 screws and the instrument cluster (IC).
    • Disconnect the electrical connector.
scientia non olet · About LEMON Manuals