LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1594 (Information Center - Instrument Cluster (Ic), Message Center, & Warning Chimes) >> General Procedures >> Belt-Minder® Deactivating/Activating >> Preparation

Belt-Minder® Deactivating/Activating: Preparation

WARNING: This page is about a different car, the 2009 Mercury Sable, 2009 Ford Taurus X, and 2009 Ford Taurus. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: The Belt-Minder® deactivating/activating can also be carried out using the scan tool.
NOTE: The driver and front passenger Belt-Minder® are deactivated/activated independently. When deactivating/activating one seating position, do not buckle the other position as this terminates the process.
  1. Before deactivating/activating the Belt-Minder®, set the parking brake.
  2. Place the transmission selector lever in PARK.
  3. Place the ignition switch in the OFF position.
  4. Unbuckle the driver and front passenger safety belts.
scientia non olet · About LEMON Manuals