LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1592 (Exterior Lighting System) >> Removal And Installation >> Headlamp Assembly >> Installation

Headlamp Assembly: Installation

WARNING: This page is about a different car, the 2009 Mercury Sable, 2009 Ford Taurus X, and 2009 Ford Taurus. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the electrical connectors and position the headlamp assembly in place.
  2. Install the headlamp assembly side bolt.
    • Tighten to 7 Nm (62 lb-in).
  3. Install the headlamp assembly front bolt.
  4. Install the headlamp assembly top bolt(s).
  5. Install the front bumper cover. For additional information, refer to BUMPERS article.
scientia non olet · About LEMON Manuals