Lower Arm Bushing: Removal

WARNING: This page is about a different car, the 2009 Mercury Sable, 2009 Ford Taurus X, and 2009 Ford Taurus. However, it is still accessible from the selected car via links, so may be relevant.

Remove the lower arm. For additional information, refer to Lower Arm .
Index-mark the bushing-to-lower arm position for reference during the installation procedure.

NOTE: The Drive Pinion Bearing Cone Remover is used to secure the lower arm bushing while separating the bushing from the lower arm.

Using the Drive Pinion Bearing Cone Remover, a suitable press and adapters, remove the lower arm bushing.

Fig 1: Identifying Special Tool (205-D002)

Courtesy of FORD MOTOR CO.