Camshaft Lobe Lift

WARNING: This page is about a different car, the 2009 Mercury Sable, 2009 Ford Taurus X, and 2009 Ford Taurus. However, it is still accessible from the selected car via links, so may be relevant.

SPECIAL TOOLS

Illustration	Tool Name	Tool Number
Courtesy of FORD MOTOR CO.	Dial Indicator Gauge with Holding Fixture	100-002 (TOOL-4201-C) or equivalent

NOTE: Refer to the appropriate Engine article for the specification.

Use the Dial Indicator Gauge with Holding Fixture to measure camshaft intake/exhaust lobe lift.
- Rotate the camshaft and subtract the lowest indicator reading from the highest indicator reading to figure the camshaft lobe lift.

Fig 1: Identifying Special Tool (100-002)

Courtesy of FORD MOTOR CO.