- The red brake warning indicator and the yellow ABS warning indicator are illuminated
|
|
|
- The red brake warning indicator is always/never on
|
- Brake fluid level and/or brake fluid leaks
- Parking brake
- Wiring, terminals and connectors
- High-speed controller area network (HS-CAN) bus
- Instrument cluster
|
|
|
|
|
- INSPECT the tires for uneven or excessive wear, and correct inflation. REFER to WHEELS AND TIRES
article.
|
| |
|
- INSPECT the brake pads for contamination, uneven taper or excessive wear, REFER to Brake Pads .
|
| |
|
|
| |
- Brake calipers and/or guide pins
|
|
| |
- Suspension component and/or wheel alignment
|
|
- Brake pedal goes down fast
|
- Brake fluid leaks and/or air in the system
|
- INSPECT the system for leaks. REPAIR as necessary. FILL the brake master cylinder reservoir. BLEED the system. REFER to Brake System Bleeding .
|
| |
|
|
| |
- Hydraulic control unit (HCU)
|
|
- The brake pedal eases down slowly
|
|
|
| |
|
|
| |
|
|
- Brakes lock up under light brake pedal force
|
|
- INSPECT the brake pads for uneven taper or excessive wear, REFER to Brake Pads .
|
| |
- Brake calipers and/or guide pins
|
|
| |
- Anti-lock brake control system
|
|
- Excessive/erratic brake pedal travel
|
- Brake fluid leaks and/or air in the system
|
|
| |
- Brake calipers and/or guide pins
|
|
| |
|
- INSPECT the brake flexible hoses for swelling and damage. INSTALL new as necessary. REFER to FRONT DISC BRAKE
article for front disc brakes or REAR DISC BRAKE
article for rear disc brakes.
|
| |
|
|
| |
|
- INSPECT the brake pads for taper wear, REFER to Brake Pads .
|
| |
|
- INSPECT the brake pedal for binding, obstructions and correct installation. REPAIR as necessary. CHECK the brake pedal fasteners for correct torque. REFER to Specifications in HYDRAULIC BRAKE ACTUATION
article.
|
| |
- Anti-lock brake control system
|
|
|
|
|
|
| |
|
- INSPECT the caliper guide pins for correct operation. INSTALL new components as necessary. REFER to Brake Caliper Guide Pins .
|
| |
|
|
| |
|
|
| |
|
|
- Excessive brake pedal effort
|
- Insufficient engine vacuum for brake booster operation
|
|
| |
- Brake booster manifold vacuum hose
|
- VERIFY engine vacuum at the booster. REROUTE, REPAIR or INSTALL new components as necessary.
|
| |
|
- VERIFY engine vacuum at the booster. CARRY OUT the Brake Booster in Component Tests .
|
| |
- Brake booster check valve
|
- VERIFY engine vacuum at the booster. CARRY OUT the Check Valve in Component Tests .
|