LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1539 (HVAC Climate Control System) >> Removal And Installation >> Clutch And Clutch Field Coil >> Removal

Clutch And Clutch Field Coil: Removal

WARNING: This page is about a different car, the 2009 Mercury Grand Marquis and 2009 Ford Crown Victoria. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the A/C compressor. For additional information, refer to Air Conditioning (A/C) Compressor .
  2. Remove the A/C clutch disc and hub bolt.
    1. Hold the A/C clutch disc and hub with the special tool.
    2. Remove the A/C clutch disc and hub bolt.
    3. Fig 1: A/C Clutch Disc & Hub Bolt
    GF0004394Courtesy of FORD MOTOR CO.
  3. Remove the A/C clutch disc and hub.
  4. Remove the A/C compressor pulley snap ring.
  5. Remove the A/C compressor pulley.
    1. Install the special tool.
    2. Remove the A/C compressor pulley.
    6. Fig 2: A/C Compressor Pulley
    GF0004395Courtesy of FORD MOTOR CO.
    CAUTION: Do not use air tools. The A/C clutch field coil may be easily damaged.
  6. Remove the A/C clutch field coil.
    1. Install the special tool.
    2. Install the special tool.
    3. Remove the A/C clutch field coil.
    7. Fig 3: Identifying A/C Clutch Field Coil And Special Tool
    GF0008052Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals