LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1539 (HVAC Climate Control System) >> Removal And Installation >> Ambient Air Temperature Sensor >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2009 Mercury Grand Marquis and 2009 Ford Crown Victoria. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the upper radiator sight shield.
  2. Disconnect the electrical connector.
    3. Fig 1: Ambient Air Temperature Sensor Electrical Connector
    GF0014375Courtesy of FORD MOTOR CO.
  3. Remove the ambient air temperature sensor.
    4. Fig 2: Ambient Air Temperature Sensor
    GF0014376Courtesy of FORD MOTOR CO.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals