LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1532 (Engine Mechanical) >> In-Vehicle Servicing >> Crankshaft Pulley >> Removal

Crankshaft Pulley: Removal

WARNING: This page is about a different car, the 2009 Mercury Grand Marquis and 2009 Ford Crown Victoria. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the engine cooling fan and fan shroud. For additional information, refer to ENGINE COOLING article.
  2. Rotate the tensioner clockwise and remove the accessory drive belt.
    3. Fig 1: Accessory Drive Belt
    GF0046678Courtesy of FORD MOTOR CO.
  3. Remove the crankshaft pulley bolt.
    4. Fig 2: Crankshaft Pulley Bolt
    GF0046679Courtesy of FORD MOTOR CO.
  4. Using the Crankshaft Vibration Damper Remover, remove the crankshaft pulley.
    5. Fig 3: Removing Crankshaft Pulley
    GF0013560Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals