Disassembly And Assembly

WARNING: This page is about a different car, the 2009 Mercury Grand Marquis and 2009 Ford Crown Victoria. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Inspect the outer and inner races for scores or damaged surface areas where rollers contact the races. Inspect the rollers and springs for excessive wear or damage. Inspect the spring and cage for bent or damaged spring retainers.

Rotate the center support counterclockwise and lift to remove the planetary gear support.

Fig 1: Rotating Center Support Counterclockwise And Removing Planetary Gear Support

Courtesy of FORD MOTOR CO.

Remove the planetary one-way clutch (OWC).

Fig 2: Locating Planetary One-Way Clutch

Courtesy of FORD MOTOR CO.

To assemble, reverse the disassembly procedure.