Alignment Specifications
WARNING: This page is about a different car, the 2009 Mercury Grand Marquis and 2009 Ford Crown Victoria. However, it is still accessible from the selected car via links, so may be relevant.
ALIGNMENT SPECIFICATIONS
| Item | LH | RH | Total/ Split |
|---|---|---|---|
| Front - Crown Victoria/Grand Marquis (Air Suspension) | |||
| Camber | -0.40°± 0.75° |
-0.40°± 0.75° |
0°± 0.75° |
| Caster | 6.2°± 0.75° |
6.5°± 0.75° |
-0.3°± 0.75° |
| Toe @ curb ride height (positive value is to -in, negative value is toe out) | - | - | -0.15° ± 0.20° |
| Front - Crown Victoria/Grand Marquis (Base)/Coil Spring Rear | |||
| Camber | -0.40°± 0.75° |
-0.40°± 0.75° |
0°± 0.75° |
| Caster | 5.9°± 0.75° |
6.2°± 0.75° |
-0.3°± 0.75° |
| Toe @ curb ride height (positive value is toe-in, negative value is toe-out) | - | - | -0.15° ± 0.20° |
| Front - Crown Victoria/Grand Marquis (Police/Taxi/Fleet) | |||
| Camber | -0.40°± 0.75° |
-0.40°± 0.75° |
0°± 0.75° |
| Caster | 5.7°± 0.75° |
6.0°± 0.75° |
-0.3°± 0.75° |
| Toe @ curb ride height (positive value is toe-in, negative value is toe-out) | - | - | -0.15° ± 0.20° |