Spring Lock Coupling: Connect

WARNING: This page is about a different car, the 2009 Mercury Grand Marquis and 2009 Ford Crown Victoria. However, it is still accessible from the selected car via links, so may be relevant.

Install the spring lock coupling spring.

Fig 1: Identifying Spring Lock Coupling Spring

Courtesy of FORD MOTOR CO.

Lubricate the inside of the coupling with PAG oil.

Fig 2: Identifying Coupling Inside Area For Lubrication

Courtesy of FORD MOTOR CO.

NOTE: Use only the new O-ring seals. The use of any O-ring seals other than those specified in the Ford Master Parts Catalog may result in intermittent leakage during vehicle operation.

Install the O-ring seals.

Fig 3: Identifying O-Ring Seals

Courtesy of FORD MOTOR CO.

Connect the spring lock coupling fittings with a twisting motion until the spring lock coupling spring snaps over the flared end of the female fitting.

Fig 4: Connecting Spring Lock Coupling Fittings

Courtesy of FORD MOTOR CO.

Install the spring lock coupling clip.