DTC P1635: Tire/Axle Ratio Out of Acceptable Range
WARNING: This page does not describe the selected car, but rather 32 other vehicles, including the 2005 Mercury Sable, 2005 Mercury Mountaineer, 2005 Mercury Monterey, 2005 Mercury Montego, and 2005 Mercury Mariner. However, it is still accessible from the selected car via links, so may be relevant.
P1635 - TIRE/AXLE RATIO OUT OF ACCEPTABLE RANGE
| Description: | This DTC indicates the tire and axle information contained in the vehicle ID block (VID) does not match the vehicle hardware. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | Using the diagnostic tool, view the tire and axle parameters within the VID. They must match the vehicle hardware. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | Refer to the Description, Possible Causes and Diagnostic Aids for the DTC. | ||