DTC P0345: Camshaft Position (CMP) Sensor Circuit Malfunction (Bank 2)
WARNING: This page does not describe the selected car, but rather 32 other vehicles, including the 2005 Mercury Sable, 2005 Mercury Mountaineer, 2005 Mercury Monterey, 2005 Mercury Montego, and 2005 Mercury Mariner. However, it is still accessible from the selected car via links, so may be relevant.
P0345 - CAMSHAFT POSITION (CMP) SENSOR CIRCUIT MALFUNCTION (BANK 2)
| Description: | The test fails when the powertrain control module (PCM) can no longer detect the signal from the CMP sensor on bank 2. | ||
| Possible Causes: | See the possible causes for DTC P0340 . | ||
| Diagnostic Aids: | See the diagnostic aids for DTC P0340 . | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to DR: Camshaft Position (CMP) Sensor STEP DR1. | ||