Disassembly And Assembly

WARNING: This page is about a different car, the 2009 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.

Cut the outer cage, then remove the outer cage and rollers.

Fig 1: Locating Outer Cage And Rollers

Courtesy of FORD MOTOR CO.

Using the special tool and a press, remove the inner bearing.

Fig 2: Locating Inner Bearing

Courtesy of FORD MOTOR CO.

Using the special tool, install the new countershaft bearing.

Fig 3: Locating Countershaft Bearing

Courtesy of FORD MOTOR CO.