Input Shaft and Bearing: Assembly

WARNING: This page is about a different car, the 2009 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.

Using the Input Shaft Seal Replacer, install a new input shaft seal.

Fig 1: Installing Input Shaft Seal

Courtesy of FORD MOTOR CO.

NOTE: Do not install the end play selective shims at this time.

Install the input shaft bearing cup.

Fig 2: Locating Input Shaft Bearing Cup

Courtesy of FORD MOTOR CO.

Using a press and a capped length of pipe, install the input shaft bearing.

Fig 3: Installing Input Shaft Bearing Using A Press & A Capped Length Of Pipe

Courtesy of FORD MOTOR CO.