Intake Manifold: Notes

WARNING: This page is about a different car, the 2009 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.

Material

Item	Specification
Motorcraft Metal Surface Prep ZC-31-A	-

Fig 1: Exploded View Of Intake Manifold With Torque Specification (1 Of 2)

Courtesy of FORD MOTOR CO.

Item	Part Number	Description
1	15161	Upper radiator hose clamp
2	8A586	Upper radiator hose
3	W527352	Coolant vent hose clamp
4	8276	Coolant vent hose
5	15161	Upper radiator hose clamp
6	8A586	Upper radiator hose
7	W527352	Coolant vent hose clamp
8	8276	Coolant vent hose
9	14A464	Fuel injector electrical connector (8 required) (part of 12B637)
10	14A464	Throttle Position (TP) sensor electrical connector (part of 12B637)
11	14A464	Intake Air Temperature 2 (IAT2) sensor electrical connector (part of 12B637)
12	W527352	Supercharger (SC) bubbler hose clamp (part of 6C324)
13	6C324	SC bubbler hose
14	14A464	EGR system module electrical connector (part of 12B637)
15	6K817	Crankcase ventilation tube
16	14A464	Fuel rail pressure and temperature sensor electrical connector (part of 12B637)
17	9J280	Fuel supply tube
18	N806154	Throttle Body (TB) spacer bolt (4 required)
19	9E822	TB and spacer assembly
20	9L437	TB spacer gasket

Fig 2: Exploded View Of Intake Manifold With Torque Specification (2 Of 2)

Courtesy of FORD MOTOR CO.

Item	Part Number	Description
21	W527362	Charge Air Cooler (CAC) hose clamp
22	8D030	CAC hose
23	W527362	CAC hose clamp
24	8D031	CAC hose
25	8620	SC drive belt
26	8287	Heater hose clamp
27	18C553	Heater hose
28	-	Wiring harness pin-type retainer (2 required) (part of 12B637)
29	-	Wiring harness retainer bolt (2 required)
30	14K060	Wiring harness retainer
31	W705654	Intake manifold bolt (2 required)
32	W704682	Intake manifold bolt (12 required)
33	9H487	Intake manifold
34	9439	Intake manifold gasket (2 required)