LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1473 (Automatic Transmission External Controls) >> Removal And Installation >> Selector Lever Cable and Bracket >> Removal

Selector Lever Cable and Bracket: Removal

WARNING: This page is about a different car, the 2009 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Exploded View Of Selector Lever Cable & Bracket With Torque Specification
GF0015706Courtesy of FORD MOTOR CO.
Item Part Number Description
1 7E395 Transmission selector lever cable
2 7H181 Transmission selector lever cable retaining clip
3 7E395 Transmission selector lever cable
4 N605918-S439 Transmission selector lever cable bracket bolts
5 7B229 Transmission selector lever cable bracket
  1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to JACKING AND LIFTING article.
  2. Remove the selector lever cable from the selector lever.
    3. Fig 2: Removing Selector Lever Cable From Selector Lever
    GF0015704Courtesy of FORD MOTOR CO.
  3. Remove the selector lever cable from the bracket and discard the clip.
    4. Fig 3: Locating Selector Lever Cable From Bracket And Discard Clip
    GF0015707Courtesy of FORD MOTOR CO.
  4. Remove the selector lever cable from the transmission manual lever.
    5. Fig 4: Locating Shift Cable Eyelet At Manual Control Lever
    GF0015451Courtesy of FORD MOTOR CO.
  5. Remove the 2 transmission selector lever cable bracket bolts from the transmission and remove the bracket.
    6. Fig 5: Locating Transmission Shift Cable Bracket Bolts
    GF0015496Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals