LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1465 (Interior Lighting System) >> Removal And Installation >> Ambient Lighting Switch >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2009 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the floor console finish panel. For additional information, refer to INSTRUMENT PANEL AND CONSOLE .
    • Disconnect the electrical connectors.
  2. Squeeze the retaining tabs and remove the ambient lighting switch.
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals