LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1462 (Body Panel System - Front End Body Panels) >> Removal And Installation >> Fender Splash Shield >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2009 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the 3 front fender splash shield screws.
  2. Remove the 5 pin-type retainers and the front fender splash shield.
  3. Remove the 2 pin-type retainers and position the rocker panel aside.
  4. Remove the 2 pin-type retainers and the rear fender splash shield.
  5. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals