LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1461 (Exterior Trim & Ornamentation) >> Removal And Installation >> Rocker Panel Molding >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2009 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the 2 front rocker panel moulding-to-fender pin-type retainers.
  2. Remove the 8 rocker panel pin-type retainers.
  3. Using a suitable tool, release the 8 hidden pin-type retainers and remove the rocker panel molding.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals